10 Scaling the Display
To enable Y-axis autoscaling 10-2
To scale the Y-axis with Reference and Y Per Div softkeys 10-3
To set top and bottom values for the Y-axis 10-4
To scale the Y-axis with axes scale markers 10-5
To match Y-axis scaling of another trace 10-6
To scale the X-axis with axes scale markers 10-7
To match X-axis scaling of another trace 10-8
11 Selecting Display Units
To select a coordinate system 11-2
To select the frequency/time unit 11-3
To select the phase unit 11-4
To select the amplitude unit 11-5
To specify a transducer’s unit and sensitivity 11-6
To convert a displayed transducer unit 11-7
To display amplitude in dBm 11-8
Part III Using the Basics
12 Using Online Help
Todisplayhelpforakey12-2
To display a related help topic 12-3
To select a topic from the help index 12-4
To print a help topic 12-5
To exit the help system 12-6
To Next Page
Loading...
