583
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_hpib_status_operation.fm
STATus:OPERation:
Program Examples STATus:OPERation:CALL:COMMon:DATA
OUTPUT 714;”STATUS:OPERATION:CALL:COMMON:DATA:EVENT?” !Queries and clears the Operation
!Call Common Data Event Register
OUTPUT 714;”STATUS:OPERATION:CALL:COMMON:DATA:CONDITION?” !Queries and clears the Operation
!Call Common Data Condition
!Register
OUTPUT 714;”STATUS:OPERATION:CALL:COMMON:DATA:ENABLE 128” !Sets the Operation Call Common
!Data Enable Register for bit 7
OUTPUT 714;”STATUS:OPERATION:CALL:COMMON:NTRANSITION 2” !Sets the Operation Call Common
!Data Negative Transition Filter
!Register for bit 1
OUTPUT 714;”STATUS:OPERATION:CALL:COMMON:PTRANSITION 2” !Set the Operation Call Common
!Data Positive Transition Filter
!Register for bit 1
2 4 Data Connection Status Attached This bit is set to 1 when the data connection status
is Attached.
1 2 Data Connection Status Idle This bit is set to 1 when the data connection status
is Idle.
0 1 Extension Bit This bit will always be 0.
Bit
Number
Binary
Weighting
Condition Description
To Next Page
Loading...
