730
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_neg200.fm
-200 through -299 Error Message Descriptions
-233 Invalid version Indicates that a legal program data element was
parsed but could not be executed because the version of
the data is incorrect to the device. For example, a not
supported file version, a not supported instrument
version.
-240 Hardware error Indicates that a legal program command or query could
not be executed because of a hardware problem in the
device.
-241 Hardware missing Indicates that a legal program command or query could
not be executed because of missing device hardware.
For example, an option was not installed.
-250 Mass storage error Indicates that a mass storage error occurred. The
device cannot detect the more specific errors described
for errors -251 through -259.
-251 Missing mass storage Indicates that a legal program command or query could
not be executed because of missing mass storage.
-252 Missing media Indicates that a legal program command or query could
not be executed because of missing media. For
example, no disk.
-253 Corrupt media Indicates that a legal program command or query could
not be executed because of corrupt media. For example,
bad disk or wrong format.
-254 Media full Indicates that a legal program command or query could
not be executed because the media is full. For example,
there is no room left on the disk.
-255 Directory full Indicates that a legal program command or query could
not be executed because the media directory was full.
-256 File name not found Indicates that a legal program command or query could
not be executed because the file name was not found on
the media.
-257 File name error Indicates that a legal program command or query could
not be executed because the file name on the device
media was in error. For example, an attempt was made
to read or copy a nonexistent file.
-258 Media protected Indicates that a legal program command or query could
not be executed because the media was protected. For
example, the write-protect switch on a memory card
was set.
-270 Macro error Indicates that a macro related execution error
occurred.
Error Message Description
To Next Page
Loading...
Need help?
General
