731
S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_neg200.fm
-200 through -299 Error Message Descriptions
-271 Macro syntax error Indicates that a syntactically legal macro program
data sequence, according to IEEE 488.2, 10.7.2, could
not be executed due to a syntax error within the macro
definition.
-272 Macro execution error Indicates that a syntactically legal macro program
data sequence could not be executed due to some error
in the macro definition, see IEEE 488.2, 10.7.6.3.
-273 Illegal macro label Indicates that the macro label was not accepted, it did
not agree with the definition in IEEE 488.2, 10.7.3
-274 Macro parameter error Indicates that the macro definition improperly used a
macro parameter placeholder, see IEEE 4882, 10.7.3.
-275 Macro definition too long Indicates that a syntactically legal macro program
data sequence could not be executed because the string
of block contents were too long for the device to handle,
IEEE 488.2, 10.7.6.1.
-276 Macro recursion error Indicates that a syntactically legal macro program
data sequence count not be executed because it would
be recursive, see IEEE 488.2, 10.7.6.6.
-277 Macro redefinition not allowed Indicates that redefining an existing macro label, see
IEEE 488.2, 10.7.6.4.
-278 Macro header not found Indicates that a legal macro label in the *GMS?, see
IEEE 488.2, 10.13, could not be executed because the
header was not previously defined.
Error Message Description
To Next Page
Loading...
Need help?
General
