Agilent Technologies ENA Series

Appendix D 655
Softkey Functions
Analysis Menu
D. Softkey Functions
(Continued)
Fixture Simulator
De-Embedding S4P
Topology
Ports
2-4
*2
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 2 and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
2,4
3-1
*1
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 3 and 1, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
3,1
3-2
*1
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 3 and 2, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
3,2
3-4
*2
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 3 and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
3,4
4-1
*2
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 4 and 1, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
4,1
4-2
*2
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 4 and 2, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
4,2
4-3
*2
Sets the ports of the analyzer connected to ports a and b in Figure 7-6 to test
ports 4 and 3, respectively.
:CALC{1-16}:FSIM:EMB:TOP:A:PORT
4,3
Cancel Returns to the softkey display screen one level higher.
1-2-3 Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 1, 2, and 3, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
1,2,3
1-2-4
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 1, 2, and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
1,2,4
1-3-2 Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 1, 3, and 2, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
1,3,2
1-3-4
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 1, 3, and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
1,3,4
1-4-2
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 1, 4, and 2, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
1,4,2
1-4-3
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 1, 4, and 3, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
1,4,3
2-1-3 Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 2, 1, and 3, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
2,1,3
2-1-4
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 2, 1, and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
2,1,4
2-3-1 Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 2, 3, and 1, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
2,3,1
2-3-4
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 2, 3, and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
2,3,4
2-4-1
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 2, 4, and 1, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
2,4,1
2-4-3
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 2, 4, and 3, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
2,4,3
3-1-2 Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 3, 1, and 2, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
3,1,2
3-1-4
*2
Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 3, 1, and 4, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
3,1,4
3-2-1 Sets the ports of the analyzer connected to ports a, b, and c in Figure 7-6 to
test ports 3, 2, and 1, respectively.
:CALC{1-16}:FSIM:EMB:TOP:B:PORT
3,2,1
Key Operation Function SCPI Command