Appendix D 659
Softkey Functions
Analysis Menu
D. Softkey Functions
(Continued)
Transform
Window Displays softkeys for selecting a type of the window.
Maximum Selects the maximum type.
:CALC{1-16}:TRAN:TIME KBES 13
Normal Selects the normal type.
:CALC{1-16}:TRAN:TIME KBES 6
Minimum Selects the minimum type.
:CALC{1-16}:TRAN:TIME KBES 0
User Displays softkeys for setting up the user window shape.
Impulse Width Sets the impulse width value.
:CALC{1-16}:TRAN:TIME IMP:WIDT
Rise Time Sets the rise time of the step signal.
:CALC{1-16}:TRAN:TIME STEP:RTIM
Kaiser Beta Sets the b value of Kaiser Bessel window.
:CALC{1-16}:TRAN:TIME KBES
Return Returns to the softkey display screen one level higher.
Return Returns to the softkey display screen one level higher.
Conversion Displays softkeys for setting up the conversion function.
Conversion Enables or disables the conversion function.
:CALC{1-16}:CONV
Function Displays softkeys for selecting a converted parameter.
Z:Reflection Selects the equivalent impedance in reflection measurement.
:CALC{1-16}:CONV:FUNC ZREF
Z:Transmission Selects the equivalent impedance in transmission measurement.
:CALC{1-16}:CONV:FUNC ZTR
Z:Trans-Shunt Selects the equivalent impedance in transmission-shunt measurement.
:CALC{1-16}:CONV:FUNC ZTSH
Y:Reflection Selects the equivalent admittance in reflection measurement.
:CALC{1-16}:CONV:FUNC YREF
Y:Transmission Selects the equivalent admittance in transmission measurement.
:CALC{1-16}:CONV:FUNC YTR
Y:Trans-Shunt Selects the equivalent admittance in transmission-shunt measurement.
:CALC{1-16}:CONV:FUNC YTSH
1/S Selects the inverse S-parameter.
:CALC{1-16}:CONV:FUNC INV
Conjugation Selects the conjugation.
:CALC{1-16}:CONV:FUNC CONJ
Cancel Returns to the softkey display screen one level higher.
Return Returns to the softkey display screen one level higher.
Limit Test Displays softkeys for setting up the limit test function.
Limit Test Enables or disables the limit test function.
:CALC{1-16}:LIM
Limit Line Enables or disables the limit line display.
:CALC{1-16}:LIM:DISP
Edit Limit Line Displays softkeys for editing the limit line.
Delete Deletes the line at the cursor from the limit table.
:CALC{1-16}:LIM:DATA
Add Adds a new segment to the limit table under the line on which the cursor is
located.
:CALC{1-16}:LIM:DATA
Clear Limit Table Displays softkeys for clearing the contents of the limit table.
:CALC{1-16}:LIM:DATA
OK Deletes all segments in the limit table.
:CALC{1-16}:LIM:DATA
Cancel Returns to the softkey display screen one level higher.
Export to CSV
File
Exports (saves the data in formats used by other software) the limit table to
a CSV (comma-separated value) file.
:MMEM:STOR:LIM
Import from CSV
File
Imports (loads the data from files in different formats) a CSV
(comma-separated value) file to the limit table.
:MMEM:LOAD:LIM
Return Returns to the softkey display screen one level higher.
Limit Line Offset Displays softkeys for setting up the limit line offset function.
Stimulus Offset Sets the stimulus offsets.
:CALC{1-16}:LIM:OFFS:STIM
Amplitude
Offset
Sets the amplitude offsets.
:CALC{1-16}:LIM:OFFS:AMPL
Key Operation Function SCPI Command
To Next Page
Loading...
