Appendix D 683
Softkey Functions
Calibration Menu
D. Softkey Functions
(Continued)
Power Calibration Displays the softkey to execute the power calibration.
Select Port Displays the softkey to select the test port you want to calibrate.
1 Selects test port 1. None
2 Selects test port 2. None
3 Selects test port 3. None
4 Selects test port 4. None
Cancel Returns to the softkey display screen one level higher.
Correction Toggles on/off the power level error correction.
:SOUR{1-16}:POW:PORT{1-4}:CORR
Take Cal Sweep Executes the measurement of power calibration data.
:SOUR{1-16}:POW:PORT{1-4}:CORR:COLL
Abort Aborts the measurement of power calibration data. None
Use Sensor Selects the channel of the power sensor you want to use for the
measurement of power calibration data.
None
Num of Readings Sets the number of power level measurements per measurement
point (averaging factor).
:SOUR{1-16}:POW:PORT{1-4}:CORR:COLL:A
VER
Tolerance Sets the tolerance for power calibration.
:SOUR:POW:PORT{1-4}:CORR:COLL:NTOL
Loss Compen Displays the softkey to set the loss correction.
Compensation Toggles on/off the loss correction.
:SOUR{1-16}:POW:PORT{1-4}:CORR:COLL:T
ABL:LOSS
Delete Deletes the cursor line on the loss correction table.
:SOUR{1-16}:POW:PORT{1-4}:CORR:COLL:T
ABL:LOSS:DATA
Add Inserts a new segment above the cursor line on the loss correction
table.
:SOUR{1-16}:POW:PORT{1-4}:CORR:COLL:T
ABL:LOSS:DATA
Clear Loss Table Displays the softkey to clear the loss correction table.
OK Deletes all segments in the loss correction table. None
Cancel Returns to the softkey display in one level higher.
Export to CSV
File
Exports (writes in another software format) the content of the loss
correction table as a CSV (comma separated value) format file.
:MMEM:STOR:PLOS{1-4}
Import from CSV
File
Imports a saved CSV (comma separated value) format file into the
loss correction table.
:MMEM:LOAD:PLOS{1-4}
Return Returns to the softkey display in one level higher.
Sensor A Settings Displays the softkey to set the calibration coefficient for the power sensor connected to channel A.
Ref Cal Factor Sets the value of the reference calibration coefficient.
:SOUR:POW:PORT:CORR:COLL:ASEN:RCF
Delete Deletes the cursor line on the calibration coefficient table.
:SOUR:POW:PORT:CORR:COLL:TABL:ASEN:
DATA
Add Inserts a new segment above the cursor line on the calibration
coefficient table.
:SOUR:POW:PORT:CORR:COLL:TABL:ASEN:
DATA
Clear Loss Table Displays the softkey to clear the calibration coefficient table.
OK Deletes all segments in the calibration coefficient table. None
Cancel Returns to the softkey display in one level higher.
Export to CSV
File
Exports (writes in another software format) the content of the
calibration coefficient table as a CSV (comma separated value)
format file.
:MMEM:STOR:ASCF
Import from CSV
File
Imports a saved CSV (comma separated value) format file into the
calibration coefficient table.
:MMEM:LOAD:ASCF
Return Returns to the softkey display in one level higher.
Key Operation Function SCPI Command
To Next Page
Loading...
