Allied Telesis AT-9000/28 - Show Ip Https; Table 121. SHOW IP HTTPS Command

Chapter 81: Secure HTTPS Web Browser Server Commands
1186 Section XI: Management Security
SHOW IP HTTPS
Syntax
show ip http
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the status of the HTTPS server and basic
information about the certificates on the switch. An example of the
information is shown here.
Figure 185. SHOW IP HTTPS Command
The fields are defined in Table 121.
HTTPS server enabled. Port: 443
Certificate 1 is active
Issued by: self-signed
Valid from: 5/17/2010 to 5/16/2011
Subject: C=US, ST=California, L=San_Jose, O=Jones_Industries, OU=Sales,
CN=167.214.121.45
Finger print: 3FB9D543 72D8E6F8 2159F35E B634A738
Table 121. SHOW IP HTTPS Command
Field Description
HTTPS server enabled Indicates that the HTTPS server is
activated on the switch. This line is not
displayed when the server is disabled.
Port The TCP port number of the server. This
parameter, which cannot be changed, is
not displayed when the server is disabled.