Allied Telesis AT-9000/28 - Chapter 18: Port Mirror Commands; Table 24. Port Mirror Commands

305
Chapter 18
Port Mirror Commands
The port mirror commands are summarized in Table 24.
Table 24. Port Mirror Commands
Command Mode Description
“MIRROR INTERFACE” on page 306 Port Interface Creates the port mirror and adds ports
to the port mirror.
“NO MIRROR INTERFACE” on
page 307
Port Interface Removes source ports from the port
mirror and deletes the port mirror.
“SHOW MIRROR” on page 308 User Exec and
Privileged Exec
Displays the destination port and the
source ports of the port mirror.