Allied Telesis AT-9000/28 - Show Gvrp Timer

AT-9000 Switch Command Line User’s Guide
Section VII: Virtual LANs 629
SHOW GVRP TIMER
Syntax
show gvrp timer
Parameter
None.
Modes
Privileged Exec mode
Description
Use this command to display the current values for the following GARP
application parameters:
 GARP application protocol
 GVRP status
 GVRP GIP status
 GVRP Join Time
 GVRP Leave Time
 GVRP Leaveall Time
 Port information
 Mode
Example
awplus# show gvrp timer