Allied Telesis AT-9000/28 - Displaying the RADIUS Client

Chapter 82: RADIUS and TACACS+ Clients
1196 Section XI: Management Security
Displaying the
RADIUS Client
To display the settings of the RADIUS client, use the SHOW RADIUS
command in the User Exec mode or Privileged Exec mode.
awplus# show radius
Here is an example of the RADIUS client information.
Figure 186. SHOW RADIUS Command
The information is described in Table 123 on page 1223.
RADIUS Global Configuration
Secret Key : ATI
Timeout : 10 sec
Server Host : 75.103.114.23
Authentication Port : 1812
Accounting Port : 1813
Secret Key : house2
Server Host : 75.103.114.76
Authentication Port : 1812
Accounting Port : 1813
Secret Key : city14