AT-9000 Switch Command Line User’s Guide
Section XI: Management Security 1223
SHOW RADIUS
Syntax
show radius
Parameters
None.
Modes
Privileged Exec mode
Description
Use this command to display the configuration of the RADIUS client. Here
is an example of the client information.
Figure 188. SHOW RADIUS Command
The fields are defined in this table.
RADIUS Global Configuration
Secret Key : ATI
Timeout : 10 sec
Server Host : 148.76.170.34
Authentication Port : 1812
Accounting Port : 1813
Secret Key : twig12
Server Host : 148.76.170.75
Authentication Port : 1812
Accounting Port : 1813
Secret Key : light82
Table 123. SHOW RADIUS Command
Parameter Description
Secret Key The global RADIUS server key.
Timeout The length of the time, in seconds, that
the switch waits for a response from a
RADIUS server to an authentication
request, before querying the next server
in the list.
Server Host The IP address of a RADIUS server on
the network.
To Next Page
Loading...
