AT-9000 Switch Command Line User’s Guide
Section XI: Management Security 1225
SHOW TACACS
Syntax
show tacacs
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the configuration settings of the TACACS+
client on the switch. An example of the information is shown in Figure 189.
Figure 189. SHOW TACACS Command
The fields are described in Table 124.
TACACS+ Global Configuration
Secret Key :
Time : 10 sec
Server Host : 149.123.154.12
Secret : priv12a
Server Host : 149.123.154.26
Secret : navti84
Table 124. SHOW TACACS Command
Parameter Description
Secret Key The global secret key of the servers. This
cannot be changed.
Timeout The length of the time, in seconds, that
the switch waits for a response from a
TACACS+ server to an authentication
request. The default is 10 seconds. If
there is no response from any
authentication servers, the switch
reactivates the local manager accounts.
This parameter cannot be changed.
To Next Page
Loading...
