Allied Telesis AT-9000/28 - Show Auth-Mac Supplicant Interface

Chapter 55: 802.1x Port-based Network Access Control Commands
780 Section VIII: Port Security
SHOW AUTH-MAC SUPPLICANT INTERFACE
Syntax
show auth-mac supplicant interface port
Parameters
port Specifies a port. You can enter more than one port.
Mode
Privileged Exec mode
Description
Use this command to display the number and types of supplicants on
authenticator ports. This command is equivalent to “SHOW DOT1X
SUPPLICANT INTERFACE Command” on page 785. An example is
shown in Figure 129.
Figure 129. SHOW AUTH-MAC SUPPLICANT INTERFACE Command
Example
awplus# show auth-mac supplicant interface port1.0.21-
port1.0.23
Interface port1.0.3
authenticationMethod: dot1x
totalSupplicantNum: 0
authorizedSupplicantNum: 0
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 0
otherAuthenticationSupplicantNum: 0
No supplicants