Allied Telesis AT-9000/28 - Show Vlan Macaddress

AT-9000 Switch Command Line User’s Guide
Section VII: Virtual LANs 651
SHOW VLAN MACADDRESS
Syntax
show vlan macaddress
Parameters
None.
Mode
Privileged Exec mode
Description
Use this command to display the MAC addresses and the egress ports of
the MAC address-based VLANs on the switch. An example is shown in
Figure 110.
Figure 110. SHOW VLAN MACADDRESS Command
VLAN 11 MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address Ports
-------------------------------------------------
5A:9E:84:31:23:85 port1.0.4-port1.0.8
1A:87:9B:52:36:D5 port1.0.4
26:72:9A:CB:1A:E4 port1.0.4
89:01:BC:64:95:12 port1.0.4
B2:89:10:02:1C:AE port1.0.4
-------------------------------------------------
VLAN 12 MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address Ports
-------------------------------------------------
78:3e:56:C8:AE:19 port1.0.15-port1.0.22
AE:4B:76:18:54:C4 port1.0.15
E7:98:03:12:C4:C5 port1.0.15
7B:89:B2:AB:C4:57 port1.0.15
89:EB:7B:34:82:CE port1.0.15
-------------------------------------------------