Ashida ADR233B - Page 252

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 252 of 479
ADR233B
W2 – IAB MAG :
0 A
W2 – IBC MAG :
0 A
This window shows Primary Phase to Phase Current in AB &
BC of Winding 2 (W2).
Press the Minus / Down arrow key (- /) to move to the next
option.
W2 – ICA MAG :
0 A
W2 – Ia MAG :
0 A
This window shows Primary Phase to Phase Current in CA &
Secondary Current in Phase A of Winding 2 (W2).
Press the Minus / Down arrow key (- /) to move to the next
option.
W2 – Ia ANG :
0 Deg
W2 – Ib MAG :
0 A
This window shows angle of Phase A Current and Secondary
Current in Phase B of Winding 2 (W2).
Press the Minus / Down arrow key (- /) to move to the next
option.
W2 – Ib ANG :
0 Deg
W2 – Ic MAG :
0 A
This window shows angle of Phase B Current and Secondary
Current in Phase C of Winding 2 (W2).
Press the Minus / Down arrow key (- /) to move to the next
option.
W2 – Ic ANG :
0 Deg
In MAG :
0 A
This window shows angle of Phase C Current of Winding 2
(W2) and Secondary Current in Neutral.
Press the Minus / Down arrow key (- /) to move to the next
option.
W2 – In ANG :
30 Deg
W2 – Iab MAG :
0 A
This window shows angle of Neutral Current and Secondary
Current in Phase AB of Winding 2 (W2).
Press the Minus / Down arrow key (- /) to move to the next
option.
W2 – Iab ANG :
0 Deg
W2 – Ibc MAG :
0 A
This window show
s angle of Phase AB Current and
Secondary Current in Phase BC of Winding 2 (W2).
Press the Minus / Down arrow key (- /) to move to the next
option.