Ashida ADR233B - Page 300

Doc ID :ADR233B/IM/01
Ref ID : ADR233B/IM/UG
Rev No. : 05
Page No. : 300 of 479
ADR233B
PROTECTIONS
W1 SEQ OC
Enabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the W1 SEQ OC can be set i.e. Disabled /
Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
PROTECTIONS
W2 SEQ OC
Enabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the W2 SEQ OC can be set i.e. Disabled /
Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
PROTECTIONS
Undervoltage
Enabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Undervoltage can be set i.e. Disabled /
Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
PROTECTIONS
Overvoltage
Enabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the Overvoltage can be set. i.e. Disabled /
Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.
PROTECTIONS
V/Hz Protection
Enabled
Editable Setting
By using the Plus / Up arrow key (+ /) or the Minus / Down
arrow key (- /) the V/Hz Protection can be set i.e. Disabled
/ Enabled.
Press the Minus / Down arrow key (- /) to move to the next
option.