Branson 2000Xc - Page 266

100-412-234 REV. 06 253
28C
Missing Part
Conflict
The missing part
minimum distance is equal
to or greater than the plus
suspect trigger limit.
Change the missing part
minimum distance limit or
+suspect trigger distance limit
through the Alarm Information
screen or Setup menu.
28D
Missing Part
Conflict
The missing part
minimum distance is equal
to or greater than the
absolute distance cutoff.
Change the missing part
minimum distance limit or
absolute cutoff through the
Alarm Information screen or
Setup menu.
28E
Missing Part
Conflict
The missing part
maximum distance is equal
to or greater than the
absolute distance cutoff.
Change the missing part
maximum distance limit or
absolute cutoff through the
Alarm Information screen or
Setup menu.
28F
Missing Part
Conflict
The missing part
minimum distance is equal
to or greater than the
absolute distance setting.
This alarm occurs in
absolute mode only.
Change the missing part
minimum distance limit or
absolute distance through the
Alarm Information screen or
Setup menu.
29A
Rapid Trav.
Conflict
The rapid traverse distance
is equal to or greater than
the minus suspect absolute
limit.
Either increase the suspect
distance limit or decrease the
rapid traverse distance.
29C
Rapid Trav.
Conflict
The rapid traverse distance
is equal to or greater than
the plus reject absolute
limit.
Either increase the reject
distance limit or decrease the
rapid traverse distance
29E
Rapid Trav.
Conflict
The rapid traverse distance
is equal to or greater than
the plus suspect absolute
limit.
Either increase the suspect
distance limit or decrease the
rapid traverse distance.
29F
Rapid Trav.
Conflict
The rapid traverse distance
is equal to or greater than
the plus reject trigger limit.
Either increase the reject
distance limit or decrease the
rapid traverse distance
2A0
Rapid Trav.
Conflict
The rapid traverse distance
is equal to or greater than
the plus suspect trigger
limit.
Either increase the suspect
distance limit or decrease the
rapid traverse distance.
2A1
Rapid Trav.
Conflict
The rapid traverse distance
is equal to or greater than
the minus reject trigger
limit.
Either increase the reject
distance limit or decrease the
rapid traverse distance.
Table B.5 Setup Alarms and Messages, with Probable Cause and Corrective Action (Continued)
Alarm
ID
Display
Message
Alarm Condition/Cause Corrective Action