The welcome text will change when you change the name of your Lynx using the
Setup | System link and update the Name field.
Locale
Selects the language used to generate audit log entries.
Network
These parameters are used to setup network specific features applicable to this applica
-
tion for this device.
Configuration Channel - These parameters are used to setup network specific fea
-
tures applicable to the configuration channel.
Port – Defines the network port that is used for all communications outside of the web
server.
Timeout – Sets the timeout value in seconds for a network connection that is no lon-
ger responding.
Maximum Clients – Sets the limit for the number of simultaneous user connections to
this device.
Watchdog
Enable – Turns on the Watchdog, which monitors the execution status of the device.
Uncheck the box to disable the watchdog.
Timeout – Sets the watchdog timeout value in seconds. If the device is fails to re
-
spond for any time larger than the time out, the device is rebooted.
Time
Time Zone – Selects the time zone for all audit entries.
Daylight Savings – Check to use daylight time for the selected time zone.
Synchronize Time – Check the box to synchronize the Lynx device's time with that of
the computer running the browser. Press the Submit button to execute.
Chapter 4 - Web-based Operation System
124 Lynx™ Digital Signal Analyzer
To Next Page
Loading...