Canberra Lynx - Mixed Signal Oscilloscope

Mixed Signal Oscilloscope
The Lynx incorporates an oscilloscope which allows examination of the digital signal
reconstructed in time to assist and verify instrument setup, pole/zero optimization and
manual Reset Preamp Inhibit adjustments.
The operator has the ability to view any one of six analog signals on the same screen
as well as any combination or all of eight digital signals. Any one of the digital signals
may be used as the Trigger, and trigger options include continuous or manual arm
-
ing.
The digital signal waveforms are displayed in different colors to distinguish between
multiple traces. The waveform can be printed to a printer, depending on the capabili
-
ties of your printer and the Internet browser you have chosen.
Analog Signals displayed (select one)
–
Slow Thresh
–
Fast Thresh
– Energy Mon
– ADC
– Fast Shape
Digital Signals displayed (select any / all)
– Peak Detect
– Slow Disc
– Fast Disc
–
BLR Gate
–
Store
–
Ext. Gate In
–
Reject
–
Inhibit
User’s Manual 153
Mixed Signal Oscilloscope