E. Installation Considerations
This unit complies with all applicable European Union requirements. Compliance test
-
ing was performed with application configurations commonly used for this device.
During the design and assembly of the device, precautions were taken by the manufac
-
turer to minimize the effects of EMI on the system. However, care should be taken to
maintain full compliance. These considerations include:
•
A rack or tabletop enclosure fully closed on all sides with rear door access
•
Single point external cable access
•
Compliant grounding and safety precautions for any internal power distribution
•
The use of CE compliant accessories such as fans, UPS, etc.
Maintenance
Any repairs or maintenance should be performed by a qualified Canberra service rep-
resentative. Failure to use exact replacement components, or failure to reassemble the
unit as delivered, may affect the unit’s compliance with the specified EU require-
ments.
Technical Support
For technical assistance, call our Customer Service Hotline at (800) 255-6370 or email
techsupport@canberra.com
.
User’s Manual 199
To Next Page
Loading...