8. Discovering the Lynx MCA
If the Discover button is selected and the Universal Plug and Play features have
been activated (in Lynx and with your Windows PC), returned unit identification can
be displayed.
Note Discover will only work on networks that do not block uPnP messages.
9. Device Configuration
Would be 'as necessary' in configuring your High Voltage, Sample changer, DSP Gain
and DSP Filter shaping would all be utilizing the Lynx configuration settings via the
MVC Adjust screens after editing the configuration and saving the MID file.
MCA Input Definition (MID) Editor
User’s Manual 31
Figure 23 - MID Plug and Play Discovery of Lynx
Figure 24 - MID Devices Configuration Options
To Next Page
Loading...