108 • DM NAX® Product Manual — Doc. 9045M
2. Position the device as desired and use screws (not included) and anchors (not included) to mount
it.
Rack Installation
The DM-NAX-AMP-X300 occupies one half of 1RU of rack space. Two DM-NAX-AMP-X300 units can be
placed together and only occupy 1 RU of rack space.
Single Amp
To install the included rack ears on a single DM-NAX-AMP-X300:
1. Use a #1 Philips screwdriver to remove the three screws from each side of the front of the device.
2. Use the screwdriver and the four included 1/4 in. Philips Pan Head screws to attach the included
rack ears to the device.
3. Mount the device into the rack using four rack mounting screws (not included).
Double Amp
To rack-mount two DM-NAX-AMP-X300 units together:
To Next Page
Loading...
