Product Manual — Doc. 9045M DM NAX® • 77
Apple® AirPlay® Setup
The DM-NAX-8ZSA supports AirPlay 2 and requires iOS11.4 or later.
AirPlay can be enabled on any of the built-in media players on the DM-NAX-8ZSA.
To stream media from an iOS device to a speaker zone in your distributed audio system:
1. Ensure that the iOS device and DM-NAX-8ZSA are on the same network.
2. On the DM-NAX-8ZSA, enable AirPlay for the built-in media player you would like to stream to,
either using the web UI or programming.
NOTE: If the control/media and Audio-over-IP network traffic is isolated between two
network ports on the DM-NAX-8ZSA, AirPlay will use the port specified for the Control/Media
traffic.
3. On your iOS device:
a. Enable AirPlay
b. From the list of available AirPlay destinations, select the DM-NAX-8ZSA zone you would like
to stream to.
The media player will play back audio to the selected zone(s).
Once AirPlay streaming begins, you will be able to control the volume of the streaming DM-NAX-8ZSA
speaker zones directly from your iOS device.
NOTE: By default, media players 1 - 8 route the audio signals to their corresponding speaker zones
when Airplay streaming begins. If the user has not already specified a destination speaker zone for
the media player when streaming begins, the media player will automatically route to its default
speaker zone. For example, if a user streams Airplay to media player 3, the audio will be routed to
speaker zone 3.
To Next Page
Loading...
