78 • DM NAX® Product Manual — Doc. 9045M
Spotify® Connect Setup
The DM-NAX-8ZSA supports Spotify Connect.
To configure Spotify, use your phone, tablet or computer as a remote control for Spotify. Go to
spotify.com/connect to learn how.
Spotify Connect can be enabled on any of the built-in media players on the DM-NAX-8ZSA.
To stream media from a device to a speaker zone in your distributed audio system:
1. Ensure that the device and DM-NAX-8ZSA are on the same network.
2. On the DM-NAX-8ZSA, enable Spotify Connect for the built-in media player you would like to
stream to, either using the web UI or programming.
NOTE: If the control/media and Audio-over-IP network traffic is isolated between two
network ports on the DM-NAX-8ZSA, Spotify will use the port specified for the Control/Media
traffic.
3. On your device:
a. Open the Spotify application or web client.
b. From the list of available Spotify destinations, select the DM-NAX-8ZSA zone you would
like to stream to.
The media player will play back audio to the selected zone(s).
Once Spotify Connect streaming begins, you will be able to control the volume of the streaming
DM-NAX-8ZSA speaker zones directly from your device.
NOTE: By default, media players 1 - 8 route the audio signals to their corresponding speaker zones
when Spotify Connect streaming begins. If the user has not already specified a destination speaker
zone when streaming begins, the media player will automatically route to its default speaker zone.
For example, if a user streams Spotify Connect to media player 3, the audio will be routed to
speaker zone 3.
Observe the LED Indicators
Refer to the following table for information about the LED indicators on the device.
LED Indicator Color Meaning
PWR Amber Power is being applied to the device. Thedevice is
booting.
White Device is powered on with audio passing.
Red Device is in standby mode.
To Next Page
Loading...
Need help?
General
