Product Manual — Doc. 9045M DM NAX® • 85
Connect the Device
Make the necessary connections as called out in the following illustration. Connect power last.
CAUTION:
l
Keep the device unplugged until all of the input, network, output, and speaker wiring is
complete.
l
Check the speaker cables for shorts and frayed wiring around the SPEAKER ZONES
connectors.
NOTE:
l
Ensure that the unit is properly grounded by connecting the chassis ground lug to an earth
ground (building steel).
l
To prevent overheating, do not operate this product in an area that exceeds the
environmental temperature range listed in the product specifications.
l
Do not bundle power cords together with connection cables. Doing so can result in noise.
Rear Panel
Digital Inputs
Refer to the following illustration when connecting digital audio sources.
To Next Page
Loading...
Need help?
General
