Product Manual — Doc. 9045M DM NAX® • 51
DM-NAX-AMP-X300 Specifications
Product specifications for the DM-NAX-AMP-X300 are provided below.
Specifications
Audio
Input Signal Types Balanced/unbalanced analog line/mic-level and AoIP streams.
Balanced Analog Input Maximum signal level: +21 dBu (8.7 Vrms)
Impedance: >10k Ohms
ƒ Response: 20 Hz to 20 kHz±0.5 dB
THD+N: <0.005% @ 1 KHz
S/N Ratio: 105 dB A-weight
Channel Separation: 100 dB @ 1 KHz
Mic Input Maximum gain: 60 dB
Impedance: >10k Ohms
ƒ Response: 20 Hz to 20 kHz±0.5 dB
THD+N: <0.005% @ 1 KHz @ 60 dB gain
S/N Ratio: 71 dB @ 60 dB gain A-weight
Channel Separation: 69 dB @ 60 dB gain @ 1 KHz
Balanced Analog Output Maximum signal level: +21 dBu (8.7 Vrms)
Impedance: 200 Ohms
ƒ Response: 20 Hz to 20 kHz ±0.5 dB
THD+N: 0.005% @ 1 kHz at max output
S/N Ratio: 113 dB digital in, 105 dB analog in, 20 Hz -20 kHz, A-weight
Channel Separation: 100 dB @ 1 KHz
Speaker Output ƒ Response: 20 Hz to 20 kHz ±0.5 dB at 1 W
High-Pass Filter (70V and 100V operation only): -3 dB @ 80 Hz, -12
dB/octave
THD+N: <0.1% at 1 kHz @ -3 dB full rated output power
S/N Ratio: >103 dB, 20 Hz to 20 kHz, balanced
Crosstalk: -75 dB at 1 kHz
Gain: 29 dB @ 8 Ω
Protection: Over current, under voltage, over temperature, DC offset,
extreme high frequency
Go to Sleep Time: 25 minutes with no signal present (when set to POWER
SAVER)
Wake Time: 0.5 s typical
To Next Page
Loading...
