601 • DM NAX® Product Manual — Doc. 9045M
Advanced Bluetooth Settings
To configure the settings on the Advanced tab of the Bluetooth settings section:
l
Select a Connection Management option from the drop-down.
o
In Interrupt mode, remembered paired devices can reconnect to the DM-NAX-BTIO-1G from
their Bluetooth connections list, and will interrupt any currently playing audio. The most
recent casting device to select the DM-NAX-BTIO-1G from its Bluetooth list will show a
Connected status in the Paired Devices table, and all other devices will revert to
Disconnected.
o
In Exclusive mode, remembered paired devices cannot be reconnected to the
DM-NAX-BTIO-1G from their Bluetooth connections list until the currently Connected
device is disconnected. The device that is listed as Connected in the Paired Devices table will
remain as the Connected device until it is disconnected by programming, from the web
interface, or by the casting device itself.
o
TransientExclusive mode is the same as Exclusive mode, with the added behavior that the
DM-NAX-BTIO-1G will forget the currently connected device once it is disconnected.
l
Select a Reconnect Behavior option from the drop-down.
o
Manual reconnection means that any time the Bluetooth casting device is disconnected
from the DM-NAX-BTIO-1G, it can only be reconnected by selecting the casting device from
the DMNAX device's list of paired devices.
o
Automatic reconnection means that any remembered paired Bluetooth casting device will
reconnect to the DM-NAX-BTIO-1G when it is within the wireless range of the DMNAX
device.
To Next Page
Loading...
Need help?
General
