Crestron DM NAX Series - Configure Speaker Profile

281 • DM NAX® Product Manual — Doc. 9045M
l
Move the Bussing Volume Offset slider to the right to increase or to the left to decrease the
offset.
l
Click the db arrows to increase or decrease the offset. Values range from -12dB to 12dB,
adjustable in increments of 1dB.
l
Manually enter a value in the Bussing Volume Offset field.
Configure Speaker Profile
The DM-NAX-4ZSA-50 has a library of built-in speaker profiles that contain equalizer, speaker
protection, and impedance settings specific to Crestron and third-party speaker models. Custom
speaker profiles can also be generated and loaded to the DM-NAX-4ZSA-50. The Configure Speaker
Profile field is used to apply these speaker profiles to a given zone of the DMNAX device.
NOTE: Applying a speaker profile on a zone will overwrite the existing Speaker Configuration and
Equalizer settings for that zone.
In the Global Filter field, enter the speaker's model name to search for its associated profile. Any
speaker profiles matching the search criteria are displayed.
To apply a speaker profile:
1. Select the radio button corresponding to the speaker profile.
2. Click Apply.
The equalizer, impedance, and speaker protection settings of the zone are updated as per the
applied speaker profile.
NOTE: Zone 5 does not have impedance or speaker protection settings, but speaker profiles
can still be applied to the zone output. Only the equalizer settings are effected when a
speaker profile is applied to Zone 5.
After applying a speaker profile, the Speaker Configuration and Equalizer settings for the zone can still
be edited. The Configure Speaker Profile section will display a notification if these settings were altered
after the speaker profile was applied.