537 • DM NAX® Product Manual — Doc. 9045M
NOTE: By default, the host name of the DM-NAX-AUD-USB consists of the model name followed by
the MAC address of the device. For example, DM-NAX-AUD-USB-00107FB58088.
Click + Adapter 1 to display an expanded section that shows additional information. If + Adapter 1 is
selected, click - Less details to collapse the section.
Control System
The Control System section displays connection information, consisting of the following:
l
Encrypt Connection: ON or OFF
l
IP ID: Reports the currently used IP ID of the DM-NAX-AUD-USB
l
IP Address/Hostname: The IP address of the control system
l
Room ID: Displays the room ID
l
Status: OFFLINE or ONLINE
Settings
The Settings tab enables configuration of the DM-NAX-AUD-USB settings. The Settings page can be
accessed at any time by clicking the Settings tab of the DM-NAX-AUD-USB interface.
Many options in the Settings tab are exclusive to a specific device mode: Residential or Commercial. The
DM-NAX-AUD-USB is in Commercial mode by default.
This section provides the following information:
To Next Page
Loading...
Need help?
General
