Product Manual — Doc. 9045M DM NAX® • 21
DM-NAX-4ZSP
The Crestron DM-NAX-4ZSP is a next generation Audio-over-IP (AoIP) preamplifier that puts Crestron
multiroom audio distribution on the network. It provides four stereo zone (8-channel) line-level outputs.
A dedicated streaming service player enables streaming different content in each of the four zones.
The DM NAX® platform is built on AES67 standards with additional ease of configuration via a web
interface, SIMPL Windows, C#, and/or a RESTful API. It is compatible with the following:
l
DM NVX® platform through the AES67 secondary audio stream
l
Third-party AES67 solutions
l
Dante® devices via the compatibility mode enabled through Dante Controller
Full DSP capabilities are available on the line and speaker outputs. Voltage triggers corresponding to
the four stereo line-level analog outputs can be used to power connected external amplifiers on and off.
For installation information, refer to the DM-NAX-4ZSP Quick Start.
Physical Description
The following sections provide information about the connectors, controls, and indicators that are
available on the DM-NAX-4ZSP device.
Front Panel
The following illustration shows the front panel of the DM-NAX-4ZSP.
To Next Page
Loading...
Need help?
General
