Product Manual — Doc. 9045M DM NAX® • 25
DM-NAX-AMP-X300
The DM-NAX-AMP-X300 is a high performance, space saving, energy efficient, professional grade
Audio-over-IP(AoIP) amplifier. Supporting DMNAX, Dante, AES67, and local inputs, all with full
DSPcapabilities, this multichannel amplifier is suitable for both residential and commercial
configurations.
l
Audio-over-IP (AoIP) amplifier
l
Native Dante® mode
l
Full DSP capabilities
l
Streamlined configuration through a web interface
l
ENERGY STAR® certified power amplifier
l
1 RU high, half-rack width form factor supports surface and rack mounting
l
Configurable for Lo-Z (4/8 Ω) or Hi-Z (70V or 100V) operation
l
Configurable for 4 x up to 75 W output, 2 x up to 150 W output, 1 x up to 300 W (bridged) output,
and 2 x up to 75 W + 1 x up to 150 W (bridged) output
l
Matrix mixing of any input to any output
l
Always On feature allows constant on connection with very low power consumption
l
Connects directly to a managed network to route to or from DMNAX/DMNVX®, AES67, or Dante
devices
l
Supports mic/line level analog inputs and balanced/unbalanced line level outputs
l
Individual zone power control and global standby
l
Seamless Crestron system integration with Crestron Home® OS and SIMPLWindows
programming
Audio-over-IP
DM NAX takes audio distribution to a whole new level by putting it on the network. The
DM-NAX-AMP-X300 sends and receives DM NAX, Dante, and AES67 encoded audio over a standard IP
network. A single DM NAX system can handle audio distribution between 32 DM NAX devices and
To Next Page
Loading...
Need help?
General
