415 • DM NAX® Product Manual — Doc. 9045M
NOTE: By default, the host name of the DM-NAX-AMP-X300 consists of the model name followed
by the MAC address of the device. For example, DM-NAX-AMP-X300-00107FB58088.
Click + Adapter 1 to display an expanded section that shows additional information. If + Adapter 1 is
selected, click - Less details to collapse the section.
NOTE: The + Adapter 2 option appears when the dual Ethernet ports on the DM-NAX-AMP-X300
are set to isolate traffic using the Port Selection feature.
Control System
The Control System section displays connection information, consisting of the following:
To Next Page
Loading...
