Crestron DM NAX Series - Zone; Delay; Output

Product Manual — Doc. 9045M DM NAX® • 604
Zone
Click Zone to access the settings for Delay.
Delay
To set the delay, do one of the following:
l
Move the Delay Time(ms) slider to the right to increase or to the left to decrease the delay time.
l
Click the ms arrows to increase or decrease the delay. Values range from 0ms to 85ms,
adjustable in increments of 1ms.
l
Manually enter a value in the Delay Time(ms) field.
NOTE: The Delay feature is only available on the line level output channels.
Output
Click Output to access the settings for Minimum/Maximum Volume and Signal.