Crestron DM NAX Series - Output; Minimum;Maximum Volume

Product Manual — Doc. 9045M DM NAX® • 278
l
Move the Delay Time(ms) slider to the right to increase or to the left to decrease the delay time.
l
Click the ms arrows to increase or decrease the delay. Values range from 0ms to 250ms,
adjustable in increments of 1ms.
l
Manually enter a value in the Delay Time(ms) field.
Output
Click Output to access the settings for Minimum/Maximum Volume, Stereo/Mono, Signal, Bussing
Volume Offset, Configure Speaker Profile, Speaker Configuration, Casting, Speaker/Faults, Line Out,
Signal Generator, Advanced Signal Generator, and Equalizer Settings.
Minimum/Maximum Volume
1. To set the minimum volume of the zone, do one of the following:
l
Move the Minimum slider to the right to increase or to the left to decrease the minimum
volume.
l
Click the % arrows to increase or decrease the minimum volume. Values range from 0 to
50%, adjustable in increments of 1%.
l
Manually enter a value in the Minimum field.