44 • DM NAX® Product Manual — Doc. 9045M
DM-NAX-4ZSP Specifications
Product specifications for the DM-NAX-4ZSP are provided below.
Specifications
Audio
Input Signal Types 4 stereo analog (RCA);
4 digital S/PDIF (2 TOSLINK® and 2 Coaxial)
Output Signal Types 4 stereo analog outputs, Outputs 1 and 2 have a balanced 5-pin stereo Phoenix
connection and an unbalanced RCA connection
Sampling Rates and Bit
Depths
Digital Input (Coaxial): Up to 192 kHz,
24-bit;
Digital Input (Optical): Up to 96 kHz,
24-bit;
Media Players: Up to 192 kHz, 24-bit
Source Compensation ±10.0 dB per input
Input Monitoring Source Signal Detect
Frequency Response 20 Hz to 20 kHz ±0.2 dB
THD 0.006%
S/N Ratio 110 dB digital in, 108 dB analog in
Zone Volume Level Control -80.0 to +20.0 dB, adjustable from 0% to 100% plus mute
Bass Control ±12.0 dB
Treble Control ±12.0 dB
Loudness Compensation On/Off
Dynamic Range Control Off/Low/Medium/High
Balance Control Left/right adjustable
Tone Profiles Flat, Classical, Jazz, Pop, Rock, Spoken Word
EQ Filter Types EQ, High Pass, Low Pass, Treble Shelf, Bass Shelf, Notch
EQ Center Frequency 10 to 20,000 Hz per band
EQ Gain +20/-40 dB per band
EQ Bandwidth 0.1 to 4.0 octaves per band
Bus Volume Offset ±12.0 dB per zone for output bussing