Product Manual — Doc. 9045M DM NAX® • 45
Communications
Ethernet For control, AoIP, and or console, 100/1000 Mbps, auto-switching, auto-negotiating,
auto-discovery, full/half duplex, DHCP
USB For configuration management
Connectors
SPDIF SOURCES 1 – 2 (2) JIS F05 female (TOSLINK) optical fiber connector;
S/PDIF optical digital audio input
SPDIF SOURCES 3 – 4 (2) RCA female;
S/PDIF coaxial digital audio inputs;
Input Impedance: 75 Ohms
ANALOG SOURCES L/R 5
– 8
(8) RCA female comprising (4) unbalanced stereo line-level audio inputs;
Input Impedance: 10k Ohms;
Maximum Input Level:2 Vrms
ANALOG OUT L/R 1 – 4 (8) RCA connectors, female;
Comprises (4) unbalanced line-level stereo audio outputs (mirror corresponding
amplified output pairs 1 – 4);
Output Impedance:100 Ohms;
Maximum Output Level: 2 Vrms
ANALOG OUT L/R 1 – 2 (2) 5-pin 3.5mm detachable terminal blocks;
Balanced stereo line-level audio outputs (mirror corresponding unbalanced output
pairs 1 – 2);
Output Impedance: 150 Ohms;
Maximum Output Level: 4 Vrms
Ethernet 1 (1) 8-wire RJ45 female;
100Base-T/1000Base-TX Ethernet port
Ethernet 2 (1) 8-wire RJ45 female;
100Base-T/1000Base-TX Ethernet port
USB (1) USB Type B connector, female;
USB computer console port (cable included);
For setup only
100-240V~50/60Hz
Universal AC
(1) IEC 60320 C14 main power inlet, mates with removable power cord (included)
G 6-32 screw, chassis ground lug
To Next Page
Loading...
Need help?
General
