Crestron DM NAX Series User Manual

Product Manual — Doc. 9045M DM NAX® • 61
DM-NAX-BTIO-1G Specifications
Product specifications for the DM-NAX-BTIO-1G are provided below.
Specifications
Audio
Input Signal Types Unbalanced stereo analog line-level;
Stereo Bluetooth wireless;
DMNAX/AES67 audio-over-IP
Output Signal Types Unbalanced stereo analog line-level;
DMNAX/AES67 audio-over-IP
Source Compensation ±10.0dB per input
Input Monitoring Source Signal Detect
Frequency Response (at
line-level output)
20Hz to 20kHz ±0.5 dB
THD+N Line-level: 0.005% @ 1kHz, max output;
Bluetooth: 0.05% @ 1kHz, max output
S/N Ratio (at line-level
output)
From line-level input: 108dB, 20Hz to 20kHz, A-weighted;
From digital input: 111dB, 20Hz to 20kHz, A-weighted
Balance Control Left/right adjustable
Communications
Ethernet For control and PoE, AoIP, and/or console, 100/1000 Mbps, auto-switching, auto-
negotiating, auto-discovery, full/half duplex, DHCP
Bluetooth For audio input, Bluetooth 5.3 sink device, recalls up to seven previously paired devices,
persistent or non persistent pairing, exclusive or interrupting connection modes
Connectors
IN (1) 3.5mm connector, female TRS;
Unbalanced line-level audio input;
Maximum input level: 2Vrms;
Input Impedance: 10kΩ
OUT (1) 3.5mm connector, female TRS;
Unbalanced line-level audio output;
Maximum output level: 2Vrms;
Channel separation: 80dB @ 1kHz;
Output Impedance: 100Ω
G (1) 6-32 screw;
Chassis ground lug
ETHERNET PoE (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port

Crestron DM NAX Series Specifications

General

Brand	Crestron
Model	DM NAX Series
Category	Conference System
Language	English