Product Manual — Doc. 9045M DM NAX® • 87
Speaker Connections
Connect speakers to the DM-NAX-4ZSA-50 as shown in the following illustration.
Spotify® Setup
The DM-NAX-4ZSA-50 supports Spotify.
To configure Spotify, use your phone, tablet or computer as a remote control for Spotify. Go to
spotify.com/connect to learn how.
Spotify can be enabled on any of the built-in media players on the DM-NAX-4ZSA-50.
To stream media from a device to a speaker zone in your distributed audio system:
1. Ensure that the device and DM-NAX-4ZSA-50 are on the same network.
2. On the DM-NAX-4ZSA-50, enable Spotify for the built-in media player you would like to stream
to, either using the web UI or programming.
NOTE: If the control/media and Audio-over-IP network traffic is isolated between two
network ports on the DM-NAX-4ZSA-50, Spotify will use the port specified for the
Control/Media traffic.
3. On your device:
a. Enable Spotify
b. From the list of available Spotify destinations, select the DM-NAX-4ZSA-50 zone you would
like to stream to.
The media player will play back audio to the selected zone(s).
NOTE: By default, media players 1 - 5 route the audio signals to their respectively numbered speaker
zones 1 - 5. If the user has not specified the speaker zone when Spotify streaming begins, the media
player will automatically route to its default speaker zone. For example, the audio from the media
player 3 will be routed to speaker zone 3.
After the Spotify streaming begins, you will be able to control the volume of the streaming DM-NAX-
4ZSA-50 speaker zones directly from your device.
To Next Page
Loading...
Need help?
General
