Crestron DM NAX Series - Bussing Volume Offset

Product Manual — Doc. 9045M DM NAX® • 220
l
If no output signal is detected, Signal will display Not Present in red and Clipping will display None
in green.
Bussing Volume Offset
Bussing Volume Offset is an additional level compensation applied to the zone relative to any other
zones it is grouped with via the Bussing feature.
To set the bussing volume offset, do one of the following:
l
Move the Bussing Volume Offset slider to the right to increase or to the left to decrease the
offset.
l
Click the db arrows to increase or decrease the offset. Values range from -12dB to 12dB,
adjustable in increments of 1dB.
l
Manually enter a value in the Bussing Volume Offset field.