Product Manual — Doc. 9045M DM NAX® • 75
Speaker Connections
The speaker outputs can be wired conventionally or bridged together to deliver higher output power.
NOTE: The Line Outputs 1-4 mirror their respective Speaker Outputs 1-4. These outputs can feed
another amplifier or an active subwoofer.
Conventional Wiring
Connect speakers to the DM-NAX-8ZSA as shown in the following illustration.
Bridged Wiring
Connect speaker outputs as shown in the following illustration to deliver more power to the speakers (8
ohm speakers only).
NOTE:
l
Before wiring the speakers for bridging, ensure that the device is configured for bridging using
web UI, Crestron Home™ software, or a Crestron SIMPL program running on a control system.
l
Bridging can only be done between a left and a right output within the labeled zone.
To Next Page
Loading...
