Product Manual — Doc. 9045M DM NAX® • 280
Mono
NOTE: The signal flow diagrams above are specifically for the speaker output zones (Zones 1
through 4). The diagrams still apply for Zone 5 with the exception of the amplifiers shown in the
path of each output channel.
Signal
The Signal section is a read-only field that displays the Signal and Clipping status of the zone output.
l
If an output signal is present but not clipping, Signal will display Present in green and Clipping will
display None in green.
l
If an output signal is present and clipping, Signal will display Present in green and Clipping will
display Present in red.
l
If no output signal is detected, Signal will display Not Present in red and Clipping will display None
in green.
Bussing Volume Offset
Bussing Volume Offset is an additional level compensation applied to the zone relative to any other
zones it is grouped with via the Bussing feature.
To set the bussing volume offset, do one of the following:
To Next Page
Loading...
