72 • DM NAX® Product Manual — Doc. 9045M
Install the Device
Refer to the Safety Instructions (Doc. 6607) prior to installation.
The device can be placed on a table or installed in a rack.
Place on a Table
Place the device on a table or stack on top of another device.
Rack Installation
This device occupies 2 RU of rack space.
To install the included rack ears:
1. Use a #1 Phillips screwdriver to remove the three screws from each side of the front of the device
as shown in the illustration.
2. Use the screwdriver and the six included 1/4 in. Phillips Pan Head screws to attach the included
rack ears to the device.
3. Mount the device into the rack using four rack mounting screws (not included).
To Next Page
Loading...
