Crestron DM NAX Series - Delay; Output; Minimum;Maximum Volume

Product Manual — Doc. 9045M DM NAX® • 170
l
Manually enter a value in the Balance field. Values range from -50 to 50, adjustable in increments
of 1. Positive values shift the balance to the right while negative values shift the balance to the
left.
Delay
To set the delay, do one of the following:
l
Move the Delay Time(ms) slider to the right to increase or to the left to decrease the delay time.
l
Click the ms arrows to increase or decrease the delay. Values range from 0ms to 85ms,
adjustable in increments of 1ms.
l
Manually enter a value in the Delay Time(ms) field.
Output
Click Output to access the settings for Minimum/Maximum Volume, Stereo/Mono, Signal, Bussing
Volume Offset, and Signal Generator.
Minimum/Maximum Volume