Crestron DM NAX Series - Page 66

Product Manual — Doc. 9045M DM NAX® • 59
OUTPUT (1) 1/8in. 3.5mm connector, female TRS;
Unbalanced line-level audio output;
Maximum output level: 2Vrms;
Channel separation: 100dB @ 1kHz;
Output impedance: 100Ω
G (1) 6-32 screw;
Chassis ground lug
ETHERNET PoE (1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port
Controls and Indicators
ETHERNET PoE Left amber LED indicates 1000Mb link status;
Left green LED indicates 100Mb link status;
Flashing right amber LED indicates Ethernet activity
SETUP (1) Push button: Used for factory reset procedures;
(1) LED, illuminates red when the button is pressed, flashes red when reset has been
initiated
Power
PoE IEEE 802.3af Class 0 (12.95W) compliant;
Compatible with IEEE 802.3af compliant Ethernet switch or third-party PoE
compliant PSE
Power Consumption 5W
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 10% to 95% RH (noncondensing)
Heat Dissipation 17BTU/hr
Construction
Chassis Metal, black and silver finish
Mounting Mountable on the following via included hardware:
1-gang U.S. electrical box or plaster ring (not included), 3.5in. (26mm) electrical box
depth recommended;
Rack rail;
Surface mount
Dimensions
Height 1.59in. (41mm)
Width 2.60in. (66mm)
Depth 2.11in. (54mm)
Weight
7oz. (199g)