Develop ineo 350 - Page 176

Field Service Ver. 1.0 Aug. 2005 9. Utility/Counter Mode
137
bizhub 200/250/350Adjustment / Setting
(7) SSL/TLS
(8) Port Number
(9) Initialize Setting
(10) Check Connection
9.5.7 Frame Type Set
Functions
• To set whether or not to use SSL/TLS during communications carried out with the
LDAP server.
Use • To use SSL/TLS during communications carried out with the LDAP server.
Setting/
Procedure
• The default setting is “OFF”.
ON “OFF”
Functions
• To change the port number used for communications with the LDAP server.
Use
Setting/
Procedure
• The default setting is “389”.
1 to 65535
Functions
• To format all settings made in LDAP Server Setting.
Use
Setting/
Procedure
1. Touch the [Initialize Setting].
2. Select [Yes] and touch [Enter].
Functions
• To check connection to the LDAP server.
Use
Setting/
Procedure
1. Touch the [Check Connection].
2. When the message indicating the completion of connection check appears, touch
[Enter].
Functions • To set the frame type for NetWare settings of NIC.
Use • To specify the frame type used for communications.
Setting/
Procedure
• The default setting is “Auto Detect”.
“Auto Detect” Ethernet-II 802.2
802.3 SNAP