Develop ineo 350 - Page 227

11. Tech. Rep. Mode Field Service Ver. 1.0 Aug. 2005
188
bizhub 200/250/350
Adjustment / Setting
(7) AT Command
D. Server Setting
• Server Setting can be set only when [E-Mail] is selected in System Input.
(1) Server for RX
<POP3 Server Address>
<POP3 User Name>
<POP3 Password>
<POP3 Port Number>
(2) RX Settings
<E-Mail Address>
Functions
• To set the command to be issued at the time of Modem Initialization.
• This setting is available only when [Modem] is selected for the system setting.
Use • To set the command to be issued at the time of Modem Initialization.
Setting/
Procedure
• Enter the command and touch [Enter] to register.
Functions • To set the POP3 server address used for CS Remote Care.
Use
• To set the address of the POP3 server.
• The POP3 server address can be set as an IP address or domain name.
Setting/
Procedure
<IP Address>
• IP address Version 4 format
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
<FQDN>
• Enter the domain name.
Functions • To set the logon name for the POP3 server used for CS Remote Care.
Use • To set the logon name for the POP3 server.
Setting/
Procedure
• Up to 63 characters (alphanumeric characters and symbols) can be used.
Functions • To set the logon password for the POP3 server used for CS Remote Care.
Use • To set the logon password for the POP3 server.
Setting/
Procedure
• Up to 15 characters (alphanumeric characters and symbols) can be used.
Functions • To set the POP3 port number used for CS Remote Care.
Use • To set the port number for the POP3 server.
Setting/
Procedure
• The default setting is “110”
“110” (1 to 65535)
Functions • To set the e-mail address used for CS Remote Care.
Use • To set the e-mail address.
Setting/
Procedure
• Up to 129 characters (alphanumeric characters and symbols) can be used.