Energetics E-204 - The Display and Its Symbols; The Computer Housing

EN
>> legend >> 03
The display and it’s symbols
(D1) START – program is running
(D2) STOP – program is interrupted or ready for selection
(D3) PROGRAM – selected program
(D4) LEVEL – selected intensity level
(D5) Gender – male
(D6) Gender – female
(D7) Time and resistance column – workout session divided into 10 sec-
tions of the total workout time input
(D8) ODO – total distance in kilometres
(D9) DIST – total distance within program
(D10) SPEED – (kilometre/hour)
(D11) RPM – cadence (pedal revolutions/minute)
(D12) HEIGHT – (cm)
(D13) TIME – (min)
(D14) CAL – calories used measured in kilojoules
(D15) WATT * – output (Watt)
(D16) TARGET HR – calculated target heart rate (beats/minute)
(D17) HEART RATE – current heart rate (beats/minute)
(D18)
 blinking: data transmission from the pulse sensor active
(D19) WEIGHT – (kg)
(D20) KPH – speed (kilometre/hour)
(D21) FAT % – body fat (%)
(D22) BMR – Basal Metabolic Rate
(D23) BMI – Body Mass Index
(D24) AGE
(D25) BODY TYPE – classifying body type on the basis of body fat value
The computer housing
Front
(C1) Display – shows all important measured and calculated values and
functions
(C2) MODE – scans through a variety of display functions during the
workout
(C3) RECOVERY – starts recovery rating
(C4) ST/SP
• brief key touch: pause, trainings interruption
• second brief key touch: stop pause, continue training
• long key touch (min. 4 seconds): reset all function, the computer
restarts, information not saved is lost
(C5) Selection button
• turning to the left or right: increase or decrease values
• press: conrm selected program or value
Back
(C6) PULSE INPUT – connector for the hand pulse sensors of your device
(C7) Insert mount – mount to attach the computer with tapped holes for
the fixing bolts
(C8) Data cable – data line and power supply for computer
* Unit specific there might not be a watt display available on the E204.