Path Description
Default
Uses the default path from the fixture's library definition. This is
generally Linear for continuous parameters and Start for slotted
parameters.
Linear Fades at a steady rate for the duration of the cue.
Start Snap change at the beginning of the cue.
End Snap change at the end of the cue.
Over The parameters overshoot their destination and then return to it.
Under
The parameters move first in the opposite direction before going to their
destination.
Damped
The parameters change more slowly at the start and end of the cue than
in the middle.
Brake The parameters change more slowly at the end of the cue.
Speed
Up
The parameters change more slowly at the start of the cue.
To Next Page
Loading...
