340 Hog 4 Operations Manual
17.9.7 Cuelists and Tracking
You can define how a cuelist deals with tracking in the Cu elist pane of the Playback
Option s window.
Open + Choo se → O ptio ns → Cuelist
The options are:
Option Default Notes
Cue Only
Off
Disables parameter tracking so that the playback state
of the list is for the current cue only.
Track Through
Loops
Off
Determines whether parameter values track from the end
of a loop back to the beginning. See Tracking Through
Loops for a full description.
17.9.8 Triggering Automatic Tasks When a Cue Runs
You can use Trigger Macros to perform a variety of tasks when a cue runs. Macros are simple
text instructions placed in the cue's Macro cell:
1. Open + Choo se : open the Cuelist window.
2. Select the Ma cro cell for the desired cue, and press Se t.
3. Type in the Macro command, then press Enter.
For a full description of the available macro commands, see Macros.
Tip: You can display a list of available commands on the console by selecting the Macro
cell in the Cuelist window and pressing the Set key.
Tip: You can enable trigger macros to occur when using the Back key to go backwards
through a cuelist.
To Next Page
Loading...
